Punctual System

Ref. 1008

Ref. 1008
Punctual system in stainless steel (AISI 304/316) for natural stone supported by barrette, minimum horizontal joint is 3mm. Length and diameter of the anchor depends on size of stone and air chamber.

Ref. 1008-R

Ref. 1008-R
Punctual system in stainless steel for grooved stone, length and diameter of the anchor depends on size of stone and air chamber. This system is recommended for rehabilitation of built facades.

Ref. 1008-RAL

Ref. 1008-RAL
Punctual system in aluminium for grooved natural Stone or porcelanic tiles, both seen and hidden. Available in two measures, 88mm and 120mm. Can be used with mortar or in ventilated façade, based in type of plate and anchor size.

Ref. 1024

Ref 1024
Punctual system in Stainless Steel for fixation with mortar. Suitable for stone with hidden system or porcelanic both hidden and seen. Fixation to base wall is made by mechanical anchor.

Ref. 1009

Ref. 1009
Punctual anchoring system in stainless steel (AISI 304/316) for cladding of porcelain stoneware or natural stone supported by inclined groove in the back of the plate. The thickness of the horizontal joint does not depend on the anchorage.

Ref. 1005

Ref. 1005
Punctual system in stainless steel. Regulable in 3 dimensions and supports the natural stone plates by barrette. Fixation to base wall is made by mechanical anchor.

Ref. 1002

Ref. 1002
Punctual system in stainless steel, supported by barrette, suitable for natural stone. Fixation to base wall by mechanical anchor.

Ref. 1026

Ref. 1026
Punctual system in stainless Steel for fixation with mortar. Suitable for stone with hidden system or porcelanic both hidden and seen. Fixation to base wall is made by mechanical anchor.

Ref. 1001 – 1004

Ref. 1001 – 1004
Punctual system of stainless steel anchors for natural stone supported by barrette. The anchor can be manufactured with AISI 304 or 316 stainless steel plate. It is suitable for plates over 20 mm thick whith mortar.

Ref. 1007 (Z)

Ref. 1007 (Z)
Anchoring Ref Z is a point anchor used in stone facings pasted hidden system. It is the simplest of all anchors manufactured by Anclajes Grapamar, SL.
It is manufactured with stainless steel wire 3 mm according to UNE-EN 10088.

Used as safety anchorage in the case of failure of the gripping mortar. This prevents the […]

Polyester Resin

Resin PFV
Resin for chemical anchor of Polyester with Fiberglass. Suitable for fixation of Punctual Anchors Ref.1008 and for anchor rods.

Epoxi Resin

Resin ESF
Resin for chemical anchor of Epoxi. Suitable for fixation of Punctual Anchors Ref.1008 and for anchor rods