Perfilería

Ref. PF 1011 hidden (DIT)

Ref. PF 1011 hidden (with DIT)
This is one of our Grapamar multipurpose systems for porcelanic tiles. It has (DIT) Technical Approval Document which supports to make projects all over the world. This system allows us a wide variation of sizes and thicknesses, so it adapts to most of attach requirements for porcelanic tiles. Horizontal joints minimum […]

Ref. PF 1011 seen (DIT)

Ref. PF 1011 seen (with DIT)
This is one of our Grapamar multipurpose systems for porcelanic tiles. It has (DIT) Technical Approval Document which supports to make projects all over the world. This system allows us a wide variation of sizes and thicknesses, so it adapts to most of attach requirements for porcelanic tiles. Horizontal joints […]

Ref. PF 1025 continuous (DIT)

Ref. PF 1025 continuous (with DIT)
It’s one of our most multipurpose systems for stone, phenolic plywood or fibercement. It has the DIT, Technical Approval Document which supports to make projects all over the world. Plate fixing can be with hidden system or seen. With seen system the maximun plate thickness is 20mm. System components are […]

Ref. PF 1025 discontinuous (DIT)

Ref. PF 1025 discontinuous (with DIT)
It’s a DIT profile system in 6063T6 aluminium suitable for stone with hidden system. With seen system the maximun stone thickness is 20mm.It consists in 120mm pieces of horizontal profile fixed in vertical profiles. Minimun horizontal joint is 6mm and vertical 3mm.

Ref. PF 1010

Ref. PF 1010
Profile system of stainless Steel and aluminium, suitable for lightweight slim materials, up to 5 mm thickness for seen system, and 11 mm for hidden system. Such as porcelanic, phenolic, etc. Horizontal joint is 3 or 6 mm.

Aluminum and stainless steel profiling system, suitable for materials of reduced thickness and weight. It is […]

Ref. PF 1036

Ref. PF 1036
It is a hanging system for the placement of different types of plates such as natural stone, phenolic resin boards, Dekton, Corian, phenolic plywood, fibercement and others. It is a suitable system for large format cladding in hidden placement.

The minimum thickness of the veneer can be up to 8 mm depending on the […]

Ref. PF 1005

Ref. 1005
It’s a profile system for natural stone. It consists in a stainless Steel (304/316) or aluminum anchor; regulable in 3 dimensions and supports the plates by barrette. Minimun horizontal joint is 4mm.

Ref. PF Bonded system

Ref. PF Bonded System

Aluminum profile hidden system WITHOUT mechanical fastening. It is a system indicated for materials of reduced thickness and weight. The fixation is produced exclusively by a specific adhesive system, consisting of adhesive promoter, primer, double-sided tape and high-performance adhesive.

It is suitable for laying porcelain tiles, phenolic panels, etc. The joint between plates […]

Ref. PF 1025-T

Ref. PF 1025-T
Profile system  entirely made with Aluminium EN-AW-6063 T6, composed by vertical and continuous horizontal profiles. The horizontal profile is designed to accommodate tiles up to 5 mm thick; the profile is suitable to be painted with a similar colour as the covering.